Name: Real Fyre 16'/18' Charred Aged Split Oak Ventless Natural Gas Logs Set With Safety Pilot Kit
SKU: CHASG10-16-18-MANUALN
Availability: InStock

Find the right gas logs for your fireplace:

Manufacturer: Real Fyre
Part Number: CHASG10-16-18-MANUALN
eFireplaceStore Item Number: PTS-CHASG10-16/18-MANUALN

Features

Charred Aged Split Oak logs realistically reproduce the look of split logs cured in a woodshed
Extra flame detail visible at fire’s base
Logs are made of high-quality refractory ceramics, expanded shales and aggregates, and use an advanced calcium aluminate binder
Logs are reinforced with steel rods for added integrity, maximum reinforcement, and breakage prevention
Includes Manual Safety Pilot Kit
Set has a standing pilot light
Light log set manually using the control knob on the unit

37,000 BTUs

* Fireplace Size Requirements: The fireplace’s Middle Width must be at least 21 Inches and the Depth must be at least 12 Inches for this gas log set to fit. You can calculate the middle width of your firebox by measuring the width (left to right) approximately half way back in the firebox. If you have any questions, please contact our customer service department and we will be happy to assist you in finding the perfect size gas log set.

* Please Note: This item is a vent free appliance and installation of it may be prohibited in your jurisdiction. Customers are responsible for checking local codes and regulations prior to purchase.

Prop 65 Warning WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.

For those of you who grew up either chopping your own wood or buying split wood and storing it for the winter, you can easily recreate the look in your own home without the hassle using the Real Fyre Charred Aged Split Oak Gas Logs by Peterson. Each set of gas logs looks like the aged, charred split oak wood cured for seasons that you remember. The logs not only look great, but are constructed of the highest-quality materials in the industry and reinforced with steel rods. The charred look of the logs and the burnt-through bottom log that gives you a view of the flame and embers adds to the authentic look. The gas flames dancing realistically through the holes in the top logs provide the finishing touch. You don’t need to give up the homey look of split wood and you don’t need to break your back trying to fill up the woodpile. All you need is a set of Real Fyre Charred Aged Split Oak Gas Logs by Peterson and you and your family can continue to have your winters the way you like them.

This gas log set is a Vent Free Gas Logs Set. Vent-free gas logs (also called Ventless gas logs), which operate with the chimney flue closed, will not give you that roaring fire effect- the flame is not as realistic or as high as you’ll find with vented logs. But, vent-free logs are an efficient heat source because 100% of the heat generated stays in your home. You’ll often see vent-free logs referred to as “vent-free heaters” because that is essentially what they are. They consist of U-shaped burners with cement logs stacked on top of the heating element. Most sets have a thermostatic control that helps maintain a consistent room temperature. Vent-free heaters add moisture to the air, so it’s important to install them in a room with proper ventilation to avoid formation of mildew.

Before installing any gas log system, check your local and state codes. In some localities, vent-free heaters are not permitted. Vent-free heaters are not permitted in bedrooms, bathrooms or recreational vehicles, and must be installed in an area where curtains, furniture, clothing or other flammable objects are at least 36 inches away from the perimeter of the heater. Vent-free heater installation also is not recommended in high traffic, windy or drafty areas.

This Ventless Gas Logs Set comes with Real Fyre Vent Free burner system, ODS safety system, pre-assembled valve, lava-fyre granules, glowing embers, custom grate, and connector kit.

This gas log set is a ventless manual pilot system. The pilot will stay lit at all times. The log set is lit manually using the manual valve on the side of the burner system..